SkinPro 3 is a unique Galvanic device for professional and home esthetic use. When used with Herbal Skin Solutions skincare products, SkinPro 3 Galvanic treats the face and neck to thoroughly cleanse, and increase the penetration of anti-aging and moisturizing products by up to 75% on an ionic level! It's benefits include promoting of lymphatic drainage, increase in product penetration, reduction of fine lines and wrinkles and visibly firms and tightens skin. With 3 levels of intensity (L, M, H) you can uniquely customize each treatment setting based on your client's skin state.

The warming massage head (104 degrees max) provides adjustable output of ions and micro-shock pulses to rejuvenate the skin and increase absorption of serums and cremes. Increasing the mode (L, M, H) during "Warm Cleanse" raises the temperature to help dilate the pores and pull excess dirt and sebum for a deeper pore cleanse. 

Pro Tips: 

• When using the Skin Pro 3 Galvanic machine, it is suggested to NOT wear gloves as there are grounding strips on each side of the device. Keep one hand on one side of the client's face, neck or shoulder to keep the current grounded.
• “Warm Cleanse” & “Warm Nutrition” are not recommended for those with Rosacea. Instead use the “Lifting” mode.

Charging:
Before using this device for the first time, charge it fully. This may take up to 3 hours. The H gear light will flash indicating the machine is charging and light up solid when charging is finished. 

Warnings: 
DO NOT immerse this device in water. DO NOT use this product under steam, or while in the shower. This product is NOT water resistant, do not place where it can fall or be pulled into water. After each use, clean the stainless-steel treatment head and cotton ring clip with disinfectant. DO NOT place this product near heat or an open flame. DO NOT use this product if it is not working properly, or if it has been dropped or damaged. There are no user serviceable parts inside the units. 

Contraindications:
Saian SkinPro 3 Galvanic should not be used if you are pregnant, have a pacemaker and/ or electronic implanted device. Do not use if you have epilepsy/seizures or active cancer. Do not use if you have had extensive dental work or suspicious skin lesions. Avoid the thyroid area.

Rated voltage: 3.7V
Rated current: 1.0A
Rated Power: 3.7W

Professional Strength Skin Scrubber
Saian Natural Clinical Skincare professional strength ultrasonic skin scrubber combines two facial treatments in one compact, hand-held, wireless machine.

Recommended uses:
Used on moist skin, the deep cleaning mode exfoliates and thoroughly cleanses the face with ultrasonic vibrations that remove dead skin cells, dirt, and sebum. 

The second mode uses sonophoresis for an enhanced absorption of Herbal Skin Solutions enzymes, serums and moisturizers as you move the stainless spatula-like head at a 45 degree angle outward across the skin. 

Pro Tip: Use the Skin Scrubber to deeply cleanse the skin, assist in extractions, infuse serums, and remove thick masks for a more graceful clean-up process.

Saian hand-held portable High Frequency facial machine comes with 4 glass electrodes. 3 Neon orange, and 1 Argon Violet (the small pointed mushroom electrode). 

When applied to the surface of the skin or scalp, a mild high frequency current passes through the neon or argon gas filled glass electrode causing it to light up with a calming orange-red or warm purple glow. The result is a pleasant, therapeutic tingling sensation.

High frequency current causes an infusion of enriched oxygen molecules into the skin thereby cleansing, massaging, stimulating blood flow, re-texturizing and aiding in lymphatic drainage. The result is clearer, firmer, brighter, tighter more youthful looking skin. The application of high frequency current promotes a cleansing antibacterial action that helps kill germs and bacteria which cause acne. The skin is left feeling instantly energized, rosy, firm, refreshed and noticeably softer - even after just one treatment.

Voltage: 40,000V
Frequency: 200~300Khz3
Prong-grounded socket for safety

Hydrating Celluosic Mask:
(Water, Glycerin, Pentylene Glycol, Hyaluronic Acid, Xanthan Gum, Tetrasodium Glutamate Diacetate, Allantoin, Citric Acid, Ascophyllum Nodosum Extract, Sodium Hydroxide, Sodium Ascorbate, Argireline)

This gentle cellulosic mask replenishes the skin’s moisture levels with hyaluronic acid, and reduces the appearance of fine lines and wrinkles with Argireline. This mask’s soft blend of allantoin and seaweed extract soothes, and nourishes the skin without any added parabens, fragrance or color. 

Recommended uses:

• Store it in the refrigerator and apply after Microneedling for a cryo-cooling effect, or store it in room temperature for daily use. 
• This mask is safe to apply after RF treatments, laser, dermaplane/oil-planing, Microneedling and/or Nano-Infusion.

Pro Tips:

• Receive this mask free with every purchase of MySkinBuddy Boost. 
• Professionals are encouraged to send client's home with this mask post-treatment to prevent trans-epidermal water loss and speed healing. 

Watch our video below for more pro tips!

FaceFyt Microcurrent 
A unique Microcurrent device for professional and home esthetic use. When used with the included Peptide Conductive Gel, FaceFyt treats the face and neck to help reduce and eliminate fine lines and wrinkles. It increases the penetration of anti-aging and moisturizing products and diminishes the visible signs of aging. 

• Mode 1 Promotes massage - Low-level electrical microcurrent pulses resulting in optimal facial stimulation at 9.6Hz. 
• Mode 2 Electrical Muscle Stimulation (EMS) at 4.5Hz. Pulsating microcurrent EMS for spot-treatment and toning of facial muscle to improve facial tone and contour. 

Contraindications:
FaceFyt Microcurrent should not be used if you are pregnant, have a pacemaker and/or electronic implanted device. Do not use if you have epilepsy/ seizures or active cancer. Do not use if you have had extensive dental work or suspicious skin lesions. Do not use over areas with Botox.

Warnings:
DO NOT immerse this device in water. DO NOT use this product under steam, or while in the shower. This product is NOT water resistant, do not place where it can fall or be pulled into water. DO NOT place this product near heat or an open flame. DO NOT use this product if it is not working properly, or if it has been dropped or damaged. There are no user serviceable parts inside the units. Misuse of this product can cause harm. 

Charging your device:
Before using this device for the first time, charge it until the blue lights go out. This may take up to 3-4 hours. The lights will flash indicating the machine is charging. 

Cleaning:
After each use, clean the stainless-steel treatment probes with disinfectant. 

Voltage: 5V
Operating Frequency: 50-60Hz

 
This 8oz. Peptide Conductive Gel is included with every FaceFYT Microcurrent device purchase!

(Water (Aqua), Xanthan Gum, Phenoxyethanol, Ethylhexylglycerin, Aloe Barbadensis (Aloe Vera) Leaf Extract, Sodium Polystyrene Sulfonate, Sorghum Bicolor Stalk Juice, Glycerin, Cellulose Gum, Hyaluronic Acid, Argireline (Acetyl Hexapeptide-8), Collagen)

Peptide Conductive Gel comfortably delivers microcurrent to the skin for optimal, pro-level, visible results. Enriched with Aloe Vera and Hyaluronic acid, this lightweight serum/gel provides unparalleled hydration, helping the skin appear plump, smooth, and hydrated. Argireline (peptide) improves the appearance of facial areas prone to developing dynamic folds, including around the eyes and in the forehead area. 

Apply a generous amount of Peptide Conductive Gel on clean skin prior to using the FaceFYT Microcurrent device.